目錄
簡介 Intro
工業儀器儀表的技術人員和機械師修理，維護，校正，調整併安裝工業測量和控制儀器。他們受僱於紙漿處理公司，核力和水力發電公司，礦業公司，石化和天然氣公司，工業儀器製造公司，和工業儀器服務公司。
Industrial instrument technicians and mechanics repair, maintain, calibrate, adjust, and install industrial measuring and controlling instrumentation. They are employed by pulp and paper processing companies, nuclear and hydro power generating companies, mining, petrochemical and natural gas companies, industrial instrument and other manufacturing companies, and by industrial instrument servicing establishments.
紅章簽注文件省際認可
The Red Seal endorsement allows for interprovincial mobility.
獲得經驗後可晉升為主管職位
Progression to supervisory positions is possible with experience.
主要職責 Main Duties
- 參考製造商的手冊，電路圖和設計藍圖以確定用於測量和控制流向，水平，壓力，溫度，化學成分和其他製造工藝中的參數的儀器的測試和維修流程
- Consult manufacturer’s manuals, circuit diagrams and blueprints to determine tests and maintenance procedures for instruments used for measuring and controlling flow, level, pressure, temperature, chemical composition and other variables in manufacturing and processing
- 檢查並測試儀器及系統的運行，並運用氣動，電氣及電子的測試設備或者精密測量儀器診斷故障
- Inspect and test operation of instruments and systems to diagnose faults using pneumatic, electrical and electronic testing devices and precision measuring instruments
- 修理並調整系統零件，比如傳感器，信號傳送器和可編程邏輯器；或進行拆卸或替換有缺陷的部件
- Repair and adjust system components, such as sensors, transmitters and programmable logic controllers, or remove and replace defective parts
- 根據製造商的技術參數對部件和儀器進行校正
- Calibrate components and instruments according to manufacturers’ specifications
- 進行定期檢修工作並完成測試和維修報告
- Perform scheduled preventive maintenance work and complete test and maintenance reports
- 在已有的工廠設備和流程上安裝控制和測量儀器
- Install control and measurement instruments on existing and new plant equipment and processes
- 提供諮詢建議給流程操作者
- Consult with and advise process operators.
任職要求 Employment Requirements
- 高中學歷
- Completion of secondary school is usually required.
- 4-5年的工業儀器維修學徒經歷
- Completion of a four- or five-year apprenticeship program in industrial instrument repair
- 工業儀器技術二年制大專學歷，並要求數年工作經驗以獲得技工認證
- Completion of a two-year college program in industrial instrumentation technology and several years of work experience are usually required for trade certification.
- 可進行儀器及控制技術人員技工認證，魁省除外的加拿大各省
- Instrumentation and control technician trade certification is available, but voluntary, in all provinces and territories, except in Quebec.
- 合格的儀器和控制技術人員在完成省際紅章考試之後可簽發紅章簽注文件
- Red Seal endorsement is also available to qualified instrumentation and control technicians upon successful completion of the interprovincial Red Seal examination.
所有職稱 All Titles
- 學徒工業儀表修理工 apprentice industrial instrument mechanic
- 儀表修理工學徒 apprentice instrument mechanic
- 控制技術員，核能發電站和重水工廠 control technician, nuclear generating station and heavy water plant
- 重水工廠控制技術員 heavy water plant control technician
- 工業儀表修理工 industrial instrument mechanic
- 工業儀表面板修理工 industrial instrument panel repairer
- 工業儀表技師 industrial instrument technician
- 工業過程控制設備修理工 industrial process control equipment repairer
- 儀器維修技工 instrument maintenance mechanic
- 儀表修理工 – 公用事業 instrument mechanic – utilities
- 工業儀表技術員， instrument technician, industrial
- 儀器儀表和電氣技術員，工業 instrumentation and electrical technician, industrial
- 工業儀表技術員 instrumentation technician, industrial
- 技工，工業儀表 mechanic, industrial instrument
- 核能發電站和重水工廠控制技術員 nuclear generating station and heavy water plant control technician
- 核子控制器修理工 nucleonic controller repairer
- 精密儀器儀表修理工 precision instrument mechanic
- 過程控制設備技工 process control equipment mechanic
- 過程控制設備修理工 process control equipment repairer
- 修理工，工業過程控制設備 repairer, industrial process control equipment
- 修理工，核子控制器 repairer, nucleonic controllers
- 工業儀表的維修技師， service technician, industrial instruments
- 過程控制設備的維修技師， service technician, process control equipment
- 技術員，工業儀器 technician, industrial instruments
不包括職稱 Exclusions
- 飛機儀表技術人員（2244中飛機儀表，電氣電子機械師，技術人員和檢查員） Aircraft instrument technicians (in 2244 Aircraft instrument, electrical and avionics mechanics, technicians and inspectors )
- 電氣電子工程技師和技術人員 Electrical and electronics engineering technologists and technicians (2241)
- 工業機械師（7311 建築技工和工業機械師） Industrial mechanics (in 7311 Construction millwrights and industrial mechanics )